Contact Us    Email Massage

Featured Products

Highest quality standards are achieved through the implementations of latest technology, decades of experience and everlasting moral values , which have helped us to retain our customers as well as multiply them.

Welcome to VELMAKE SEALS

Multi Spring Seal

/> </div> <div class=
Type VT- 9 / VT - 9W are multi spring, pusher type unbalanced seals used for universal applications. The seals are compact in design suiting all types of rotating equipments, pumps and mixers. Drive lugs in the retainer will provide torque transmission and reduce slippage on shaft and sleeve. A snap ring holds all components together, helping in easy installation. The parts are interchangeable, VT- 9 can be converted to VT - 9W by just changing the seal ring and the secondary member.
 
Seal Characteristics
  • Single Seal
  • unbalanced
  • Independent of directions of rotation
 
Application
  • General Chemicals
  • Petrochemicals · Refineries
  • Light hydrocarbons, Water
 
Performance Range
Shaft Diameter dl : 18...100mm
Pressure p : 10 bar (max)
Temperature t : -20...2200C
Velocity v : 20 m/sec
 
Materials
Seal Faces : Carbon, Ceramic, SiC, Tung. Carbide
Metal Parts : SS316, SS304, Hastelloy-C, Alloy 20
O-rings : Elastomers (VT- 9)
PTFE Wedge (VT - 9W)

Single Coil Spring Seal

/> </div> <div class=
Type VSS -SPL is single coil spring seal developed for light contamination, dirty media and clogging type application. This type also allows it to fit onto a normal shaft without any balancing step. The mechanical drive of this seal is realised by grub screw which lock onto the shaft. The seal has a limited axial length, compact shape which allows easy mounting.
 
Seal Characteristics
  • Single Seal
  • Unbalanced
  • Helical Coil spring
  • Independent of direction of rotation
 
Application
  • General Chemicals
  • Petrochemicals
  • Light Hydrocarbons
 
Performance Range
Shaft Diameter dl : 10...100mm
Pressure p : 10 bar
Temperature t : -20...1800C
Velocity v : 15 m/sec
 
Materials
Seal Faces : Carbon, Ceramic, SiC, Tung. Carbide
Metal Parts : SS304, SS316, Special Alloy
O-rings : PTFE / Viton

Metal Bellow Seal

/> </div> <div class=
Type VMB - 50G seals specially designed for high temperature application and suitable for high start-up toque since the bellows unit is independent of torque transmission. Grafoil is used as a secondary member having excellent temperature range upto 4000C. Shrunk fit seal face design minimize face distortion restricting leakage and wear rate to very low level under a wide range of condition.
 
Seal Characteristics
  • Single Seal
  • Balanced
  • Metal Bellows
  • Independent of directions of rotation
 
Application
  • High temperature applications
  • Petrochemicals
  • Refineries
 
Performance Range
Shaft Diameter dl : 18...100mm
Pressure p : 20 bar (max)
Temperature t : -20...4000C
Velocity v : 20m/sec
 
Materials
Seal Faces : Carbon, SiC, Tung. Carbide
Metal Parts : SS316, SS304, Carpenter-42, Alloy 20, Hastelloy-C
O-rings : Grafoil

P.T.F.E. Bellow Seal

/> </div> <div class=
Seal faces are replaceable and can be supplied with hard materials suitable for abrasive services.
 
Seal Characteristics
  • Single Seal
  • Outside Mounted
  • Independent of direction of rotation
 
Application
  • Extremely Corrosive application
 
Performance Range
Shaft Diameter dl : 18...100mm
Pressure p : 6bar(max)
Temperature t : -45...1200C
Velocity v : 20 m/sec
 
Materials
Seal Faces : GFT, SiC, Ceramic
Metal Parts : SS304, SS316, Hast-C
O-rings : PTFE Bellow

High Pressure Seal

/> </div> <div class=
Type VC - 108B mechanical seals are designed for heavy duty service involving high pressure and sliding velocities. This seal has positive drive arrangement and sturdy construction making the seal suitable for high pressure application. Multiple spring design provides uniform face loading. The seal is supplied as a cartridge unit and can be directly bolted to stuffing box. These seals are normally used in main oil pipelines, water injection pumps and boiler feed water pumps.
 
Seal Characteristics
  • Single Seal
  • Balanced
  • Independent of direction of rotation
 
Application
  • Main Oil Pipeline
  • Water Injection Pumps
  • Boiler Feed Water Pumps
 
Performance Range
Shaft Diameter dl : 25...150mm
Pressure p : 80 bar (max)
Temperature t : -20...2200C
Velocity v : -20m/sec
 
Materials
Seal Faces : Carbon, SiC, Tung.- Carbide
Metal Parts : SS316, SS304, Hastelloy-C, Alloy 20
O-rings : Elastomers

Slurry Seal

/> </div> <div class=
Type VMH - 21 is a compact cartridgised balanced seal specially developed for handling slurries, sludges, thick syrups and polymerising fluids. In the cartridge construction the springs are isolated from the fluid enhancing the seal life. After detaching of the location plates provided, the seal can be easily installed straight away without setting measurements. Series 50B is a sturdy robust, seal capable of maintenance free runs for years together.
 
Seal Characteristics
  • Single Seal
  • Balanced
  • Independent on direction of rotation
  • Cartridge Unit
 
Application
  • Pulp & Paper
  • Slurry Pumps
  • Sludge Pumps
 
Performance Range
Shaft Diameter dl : 20...100mm
Pressure p : 18 bar (max)
Temperature t : -20...180°C
Velocity v : 20 m/sec
 
Series 51OB-D
Double seal arrangement forslurry application.
 
Materials
Seal Faces : Carbon, SiC, Tung. Carbide
Metal Parts : SS316, SS304, Hastelloy-C, Alloy 20
O-rings : Elastomers

Rubber Bellow Seal

/> </div> <div class=
Type VS - 2 is unbalanced single acting helical coil spring seals independent o1 direction of rotation. The drive ring's notch design eliminates over stressing of the elastomer bellows. Slippages are eliminated, protecting the shaft and sleeve from fretting. Seal can be repaired in field with minimum spares, minimizing the downtime cost.
 
Seal Characteristics
  • Single Seal
  • Unbalanced
  • Conical spring
  • Independent of direction of rotation
 
Application
  • Water pumps,Oil pumps
  • Blowers
  • Compressors
  • Slurry pumps
 
Performance Range
Shaft Diameter dl : 10...100 mm
Pressure p : 22 bar (max
Temperature t : -20...1400C
Velocity v : 15 m/sec
 
Materials
Seal Faces : Carbon, Ceramic, SiC, Tung. Carbide
Metal Parts : SS304, SS316
Bellows : Viton, Nitrile

Conical Spring Seals

/> </div> <div class=
Type VBSM - 3 is single conical spring, unbalanced seal with O-ring provided for secondary sealing. Since the Torque transmission is done by the single coil springs the seals are dependent on the directions of rotation, which is seen from the drive end of the shaft. Right handed spring and left handed springs are provided for clockwise and anticlockwise rotating shafts respectively. These seals can carry a variety of seals faces, serving application in submersible, sewage, chemical transfer, water pumps etc.
 
Seal Characteristics
  • Single Seal
  • Unbalanced
  • Conical spring
  • Dependent on directions of rotation
 
Application
  • Water pumps
  • Submersible pump
  • Sewage pump
 
Performance Range
Shaft Diameter dl : 10...100mm
Pressure p : 10 bar (max)
Temperature t : -20...1800C
Velocity v : 10 m/sec
 
Materials
Seal Faces : Carbon, Ceramic, SiC, Tung. Carbide
Metal Parts : SS304, SS316
O-rings : Elastomers, TTV

Capsulated Spring Seal

/> </div> <div class=
Type VTC - 12 is the balanced seal without need for step sleeve. This seals are designed for media containing solids or with high viscosity. The springs are protected from media, thus no clogging of springs or springs compartment, resulting in high reliability.
 
Seal Characteristics
  • Single Seal
  • Balanced
  • Capsulated Spring
  • Independent of direction of rotation
 
Application
  • General Chemicals
  • Food Industries
  • Media Containing Solids
 
Performance Range
Shaft Diameter dl : 18...100mm
Pressure p : 25 bar (max)
Temperature t : -20...1400C
Velocity v : 15 m/sec
 
Materials
Seal Faces : Carbon, SiC, Tung. Carbide
Metal Parts : SS304, SS316, Hastelloy-C, Alloy 20
O-rings : Viton, Nitrile

Agitator Seal

/> </div> <div class=
Type VCB - SH/C1 are preset factory assembled cartridge seals for use in Agitators, Mixers and Reactor Vessels. The seal construction varies slightly for top entry vessels, side entry vessels and bottom entry vessels. The seals are designed to the shortest shaft length and the bearings are located as close to the vessel body to minimize the deflection.
 
Seal Characteristics
  • Single Seal / Double Seal
  • Unbalanced / Balanced
  • Independent on direction of rotation
 
Application
  • General Chemicals and its vapours.
  • Petrochemicals and its vapours.
  • Light Hydrocarbons and its vapours.
 
Performance Range
Shaft Diameter dl : 25...150mm
Pressure p : vaccum 40 bar (max)
Temperature t : -20...220°C
Velocity v : 4 m/sec
 
Materials
Seal Faces : Carbon, SiC, Tung, Ceramic
Metal Parts : SS316, Hastelloy-C Alloy 20
O-rings : Elastomers, PTFE

Thermosyphon

/> </div> <div class=

With Velmake's Thermosyphon system it is possible to supply barrier fluid to double seal arrangement. The pressure of barrier fluid is higher than the pressure of the fluid being sealed. Thus seal faces remain in contact with each other and sealing area temperature is controlled. Thermosyphon system is as per API 682.

Cyclone Separator

/> </div> <div class=

Cyclone Separator are designed for removing dirt, sand and solid particles from injection flow to mechanical seal. The separation is obtained by centrifugal force generated by differential pressure across the cyclone.
 

Size : 1/2"NPT/1/2"BSP
Pressure : 120 bar
Temperature : 2000C

Heat Exchanger

/> </div> <div class=

Velmake Heat Exchangers are incorporated in API Plans 21,23,41 to bring down the temperature of buffer fluid before it enters into seal chamber. Heat Exchanger may be mounted either vertically or horizontally, the vertical mounting being preferred because of better thermosyphon effects.

Our Vision

* To embrace new technologies and methods. * To give unsurpassed products and services to the clients. * To constantly look for improvement and changes.

Site Designed & Maintained by Aman Infotech
Agitator Seal, Capsulated Spring Seal, Cartridge Seals For Reactors, Cartridge Seals For Slurry Pumps, Conical Spring Seals, Cyclone Separator, Double Cartridge Seals For Pumps, Double Cartridge Seals For Slurry Application, Dry Seals For Reactors, Heat Exchanger, High Pressure Seal, Mechanical Seals, Mechanical Shaft Seals, Metal Bellow Seal, Metal Bellow Seals, Multi Spring Seal, Multi Spring Seals, Multisegment Carbon Seal Rings, P. T. F. E. Bellow Seal, Pumps Mechanical Seals, Rubber Bellow Seal, Single Coil Spring Seal, Single Coils Spring Seals, Slurry Seal, Thermosyphon, Turbines Mechanical Seals